About Us

Boat Repair & Maintenance

At Watertight Boatworks, we believe in doing everything by the manufacturer’s specifications and recommendations. This allows us to stand by our manufacturer’s warranty, which may vary depending on the products used. All work produced is such that we will stand beside it and be proud. All products are known to be the best available and only top quality materials are used in every type of job. Structural repairs are done with due care and attention and laid up in a resin superior to the factory. Cosmic repairs are done to match flawlessly.
Ultimately, our work, if properly maintained, should last the life of the boat or until you break it.

 

About Us

Boat Repair & Maintenance

At Watertight Boatworks, we believe in doing everything by the manufacturer’s specifications and recommendations. This allows us to stand by our manufacturer’s warranty, which may vary depending on the products used. All work produced is such that we will stand beside it and be proud. All products are known to be the best available and only top quality materials are used in every type of job. Structural repairs are done with due care and attention and laid up in a resin superior to the factory. Cosmic repairs are done to match flawlessly.
Ultimately, our work, if properly maintained, should last the life of the boat or until you break it.

The Rainman Watermaker

A Brief History Of Rainman Desalination

In 2012, Dave Goldie had just got back from the Mariana Trench, in the north Pacific Ocean where he’d been working as an engineer on film maker James Cameron’s Deepsea Challenge project.

He was living on his Beneteau yacht in Sydney Harbour. Spending a lot of time away from marinas, it quickly became apparent he would need a watermaker.

After extensive research into the available systems, his frustration grew. While there are many good quality systems in the market, none of them really met his needs. Some were too complex, raising concerns about long term maintenance. All were too expensive,and all required an invasive installation process.

Pondering his options on his boat one afternoon, he looked at his red Honda portable generator. He then asked Ben Deacon, one of his sailing friends, “Why can’t someone make a system that’s as simple to use as my Honda gen set?”. After some bouncing around of ideas and concepts, he saw a challenge. Fortunately his background includes both pressure engineering and industrial design, and he set about creating a system to meet his needs.

The breakthrough idea was all about simplicity- like a portable generator that makes water instead of electricity. It would be a self-contained unit that required no installation. That allowed the elimination of all the electronics, solenoids and control systems that cause so many maintenance problems.

One the guiding principles was that they would only work with top tier suppliers. People would be taking these systems to the furthest corners of the world, so reliability would be a top priority. Working with companies such as Honda, Dow Filmtec and General Pump, components were specified that would give thousands of hours of service in a marine environment.

After several prototypes and extensive testing, Dave and Ben had developed a working pre-production prototype. Dave’s attention to detail went beyond the reliability and function of the system and extended to the design. Several hundred hours were spent hand shaping the mould for the original fibreglass shell. Internal components were designed on CAD and prototyped using 3D printing. The first thirty petrol (gasoline) systems were made with the fibreglass shell. Later the design would shift to a rotomoulded polyethylene shell for all systems.

After significant market research and enthusiastic responses from various people in the Australian marine industry, Dave and Ben knew they were on to something. They realised that in order to launch the system to the market, they would require capital for production and greater commercial experience to build Rainman into a viable business.

At the time, entrepreneur Ron Schroeder happened to be looking for an early stage opportunity to invest in and take an active role. After further market research, the three decided to commercialise the Rainman system.

The production ready prototype was launched at the 2014 Sanctuary Cove Boat show on the Gold Coast, Australia. After a massively enthusiastic response at the boat show, production began and first shipments shortly thereafter. Keen to expand our product line, work immediately began on design of the electric versions of the system (230V/50Hz and 115V/60Hz). The first units were marketed across Australia. After achieving local success, we launched internationally later in 2014.

As enthusiasm grew for the Rainman concept, it became apparent that some potential customers wanted a 12VDC Rainman system. Late 2015 and early 2016 was devoted to developing this version of our pressure unit. About 80% of people we spoke with felt strongly about retaining our simple design that includes simple and highly reliable pumps (eg. staying away from energy recovery systems). The 12VDC Rainman was launched in August 2016.


Currently, we are building a global network of dealers that want to work with our systems. We are also working on new designs of our systems to supplement our product offerings, so please watch this space.

The Rainman Watermaker

A Brief History Of Rainman Desalination

In 2012, Dave Goldie had just got back from the Mariana Trench, in the North Pacific Ocean where he’d been working as an engineer on film maker James Cameron’s Deepsea Challenge project.
He was living on his Beneteau yacht in Sydney Harbour. Spending a lot of time away from marinas, it quickly became apparent he would need a watermaker.

After extensive research into the available systems, his frustration grew. While there are many good quality systems in the market, none of them really met his needs. Some were too complex, raising concerns about long term maintenance. All were too expensive, and all required an invasive installation process.

Pondering his options on his boat one afternoon, he looked at his red Honda portable generator. He then asked Ben Deacon, one of his sailing friends, “Why can’t someone make a system that’s as simple to use as my Honda gen set?”. After some bouncing around of ideas and concepts, he saw a challenge. Fortunately, his background includes both pressure engineering and industrial design, and he set about creating a system to meet his needs.

The breakthrough idea was all about simplicity- like a portable generator that makes water instead of electricity. It would be a self-contained unit that required no installation. That allowed the elimination of all the electronics, solenoids and control systems that cause so many maintenance problems.
One the guiding principles was that they would only work with top tier suppliers. People would be taking these systems to the furthest corners of the world, so reliability would be a top priority. Working with companies such as Honda, Dow Filmtec and General Pump, components were specified that would give thousands of hours of service in a marine environment.

After several prototypes and extensive testing, Dave and Ben had developed a working pre-production prototype. Dave’s attention to detail went beyond the reliability and function of the system and extended to the design. Several hundred hours were spent hand shaping the mould for the original fibreglass shell. Internal components were designed on CAD and prototyped using 3D printing. The first thirty petrol (gasoline) systems were made with the fibreglass shell. Later the design would shift to a rotomoulded polyethylene shell for all systems.

After significant market research and enthusiastic responses from various people in the Australian marine industry, Dave and Ben knew they were on to something. They realised that in order to launch the system to the market, they would require capital for production and greater commercial experience to build Rainman into a viable business.

At the time, entrepreneur Ron Schroeder happened to be looking for an early stage opportunity to invest in and take an active role. After further market research, the three decided to commercialise the Rainman system.

The production ready prototype was launched at the 2014 Sanctuary Cove Boat show on the Gold Coast, Australia. After a massively enthusiastic response at the boat show, production began and first shipments shortly thereafter. Keen to expand our product line, work immediately began on design of the electric versions of the system (230V/50Hz and 115V/60Hz). The first units were marketed across Australia. After achieving local success, we launched internationally later in 2014.

As enthusiasm grew for the Rainman concept, it became apparent that some potential customers wanted a 12VDC Rainman system. Late 2015 and early 2016 was devoted to developing this version of our pressure unit. About 80% of people we spoke with felt strongly about retaining our simple design that includes simple and highly reliable pumps (eg. staying away from energy recovery systems). The 12VDC Rainman was launched in August 2016.


Currently, we are building a global network of dealers that want to work with our systems. We are also working on new designs of our systems to supplement our product offerings, so please watch this space.